lolMiner 1.53
For a short introduction how to mine using lolMiner, see
https://github.com/Lolliedieb/lolMiner-releases/wiki
Also have a look to the mine_coin.bat or mine_coin.sh files which can be used as
starting point to run lolMiner on the command line.
Here is a list of the most relevant parameters for lolMiner:
General:
-h [ --help ] Help screen
--config arg (=./lolMiner.cfg) Config file
--json arg (=./user_config.json) Config file in Json format
--profile arg Profile to load from Json file
--nocolor [=arg(=on)] (=off) Disable colors in output
--basecolor [=arg(=on)] (=off) Use 16 colors scheme for non-rgb
terminals
--list-coins List all supported coin profiles
--list-algos List all supported algorithms
--list-devices List all supported & detected GPUs in
your system
-v [ --version ] Print lolMiner version number
Mining:
-c [ --coin ] arg The coin to mine
-a [ --algo ] arg The algorithm to mine.
This is an alternative to --coin.
-p [ --pool ] arg Mining pool to mine on
Format: <pool>:<port>
-u [ --user ] arg Wallet or pool user account to mine on
--pass arg Pool user account password (Optional)
--tls arg Toggle TLS ("on" / "off")
--socks5 arg (=nosocks) Specifies for a Socks 5 based proxy
server. Format <ip>:<port>.
--dns-over-https arg (=1) Toggle dns over https.
0=default dns only
1=DoH with default dns as backup
(default)
2=DNS over https enforced
--devices arg The devices to mine on
Values: ALL / AMD / NVIDIA or a comma
separated list of indexces.
--devicesbypcie [=arg(=on)] (=off) Interpret --devices as list of PCIE
BUS:SLOT pair
--pers arg The personalization string.
Required when using --algo for Equihash
algorithms
--keepfree arg (=5) Set the number of MBytes of GPU memory
that should be left free by the miner.
--benchmark arg The algorithm to benchmark
Managing Options:
--watchdog arg (=script) Specify which action to take when a
card is detected to be crashed.
"off": Continue working on remaining
cards. No action.
"exit": Exit the miner with exit code
42 to ask for a restart. Recommended
for Nvidia cards.
"script": Call an external script.
Default and recommended for AMD cards.
--watchdogscript arg Specify which script to be executed
when a hung GPU is detected
--singlethread [=arg(=-1)] (=-2) Enable single mining thread mode for
all GPUs (-1) or for a specific GPU id.
--tstart arg (=0) Minimal temperature for a GPU to start
in degree C. If set to 0 disables
restart below a fixed temperature.
--tstop arg (=0) Temperature to pause or stop a GPU from
mining in degree C. If set to 0
disables stop above a fixed
temperature.
--tmode arg (=edge) Mode for temperature management.
Use "edge" (default), "junction" or
"memory" to set the mode for
temperature management.
Statistics:
--apiport arg (=0) The port the API will use
--apihost arg (=0.0.0.0) The host binding the API will use
--longstats arg (=60) Long statistics interval
--shortstats arg (=15) Short statistics interval
--statsformat arg (=extended) Format for long statistics.
Use --help-format to get an overview of
available fields.
--hstats [=arg(=0)] (=0) Select stats to be drawn in a
horizontal manner for each GPU
(default). The number overwrites the
terminal width detection.
--vstats [=arg(=0)] (=-1) Select stats to be drawn in a vertical
manner for each GPU. The number
overwrites the terminal width
detection.
--help-format [=arg(=1)] Format description for --statsformat
--digits arg Number of digits in hash speed after
delimiter
--timeprint [=arg(=on)] (=off) Enables time stamp on short statistics
("on" / "off")
--silence arg (=0) Triggers different levels of miner
verbosity. 0 = normal information, 3 =
minimal information.
--compactaccept [=arg(=on)] (=off) Enables compact accept notification
--log [=arg(=on)] Enables printing a log file ("on" /
"off")
--logfile arg Path to a custom log file location
Overclock (Experimental):
--cclk arg (=*) The core clock used for the GPUs. Cards
are separated with a comma. "*" can be
used to skip a card.
--mclk arg (=*) The memory clock used for the GPUs.
Cards are separated with a comma. "*"
can be used to skip a card.
Ethash Options:
--ethstratum arg (=ETHPROXY) Ethash stratum mode. Available options:
ETHV1: EthereumStratum/1.0.0 (Nicehash)
ETHPROXY: Ethereum Proxy
--worker arg (=eth1.0) Separate worker name for Ethereum Proxy
stratum mode.
--mode arg (=b) Kernel mode to mine on. Comma separated
values for configuring multiple cards
differently.
--lhrtune arg (=auto) Offset to most important LHR
parameters. If your card is unstable or
does not unlock try negative values.
Range is +/-40.
--lhrwait arg (=0) Time in seconds to wait after startup
before any LHR detection or calibration
takes place.
--lhrv3boost [=arg(=0)] (=1) Activating experimental >90% unlock on
LHR V3 (RTX 3050, 3080 12G) GPUS.
--disable-dag-verify [=arg(=1)] (=0) Disable the CPU side verification and
repair of DAG.
--dagdelay [=arg(=0)] (=-1) Delay between creating the DAG buffers
for the GPUs. Negative values enable
parallel generation (default).
--enablezilcache [=arg(=1)] (=0) Allows 8G+ GPUs to store the DAG for
mining Zilliqa. It will generated only
once and offers a faster switching.
--benchepoch arg (=440) The DAG epoch the denchmark mode will
use
Altcoin Options:
--ergo-prebuild arg (=-1) Disable (0) or Enable (1) the function
of pre-building the dataset for Ergo.
-1 refers to the card default.
--ton-mode arg (=0) Sets the ton pool commication mode.
0: automatic selection(default)
1: ton-miner compatible
2: ton-pool.com websocket
3: toncoinpool.io stratum
4: tonuniverse.com compatible
Ethash Expert Options:
--workmulti arg (=192) Modifys the amount of Ethash work a GPU
does per batch.
--rebuild-defect arg (=3) Triggers a DAG rebuild if a card
produced <param> defect shares. Default
is 3, use 0 to deactivate the rebuild.
--enable-ecip1099 [=arg(=on)] (=off) Enable reduced DAG size for mining ETC
from block 11.730.000 and higher.
Algorith Split Options:
--dualmode arg (=none) Dual mode used. Allowed options:
none, zil, zilEx, eth, etc
--dualpool arg Pool configuration for extra
connection, Format <pool>:<port>
--dualuser arg Username or wallet address for the
extra connection
--dualpass arg Password for the extra connection
(Optional)
--dualworker arg (=eth1.0) Separate worker name for the 2nd
connection.
--dualtls arg Toggle TLS ("on" / "off") for the 2nd
connection.
--dualdevices arg Split rule for etc and beam split mode.
Use a comma separated list of indexes
or "4G" (default).
--dualfactor arg (=auto) The ratio in mining speed between the
primary and the secondary algorithm in
dual mining. Alternative to
--maxdualimpact.
--maxdualimpact arg (=auto) The maximum impact on the eth mining
speed in dual mining in %. Default is *
for an automatic mode. Can be a comma
separated list for different GPUs.
